Reach Me

GlobalLinker Profile

Friday, September 29, 2006

Water Analysis

Water must meet a variety of safety, quality and environmental standards. These include pH, colour, conductivity, alkalinity/acidity, anions, cations, chromium 6+, cyanide, chemical and biological oxygen demand (COD/BOD), total organic carbon (TOC) etc. Water Treatment kit is used for assessment of water quality for potable water, industrial waste treatment plants.

More Inforamtion


Griffonia simplicifolia is a woody climbing shrub native to West Africa and Central Africa. It grows to about 3 m, and bThe seeds of the plant are used as a herbal supplement for their 5-Hydroxytryptophan content. 5-Hydroxytryptophan may be extracted from seeds as a supplement which as a serotonin precursor is beneficial in serotonin deficiency. Ongoing research suggests that 5-Hydroxytryptophan may also be beneficial in mood disorders including mild to moderate clinical depression and sleeping disorders. ears greenish flowers followed by black pods.

More Information

Thursday, September 28, 2006

Precipitated Silica

Silica is one of the most common chemical compounds. SiO2 crystals are found in nature in three polymorphic forms, the most common of which is quartz. The silica precipitation technology developed in India is a novel method for silica precipitation where the chemicals used are regenerated making it a closed loop operation. Successful studies for extraction of silica on laboratory scale which meet the industrial requirements have been carried out
Precipitated Silica Production plant with annual capacity of 3000 tons will require an investment around Rs.600 Lacs, according to consultants.

More Information

Surgical Sutures

Sutures are designed to help the healing of the body by closely opposing the two sides of a wound to minimize scar formation or to prevent leaking blood, like in vessels.Absorbable sutures are made of materials which are broken down in tissue after a given period of time, which depending on the suture can be from ten days to four weeks. They are used therefore in many of the inner tissues of the body.The major part of the absorbable sutures used are now made of synthetic polymer fibers, which may be braided or monofilament; these offer numerous advantages over gut sutures, notably ease of handling, low cost, low tissue reaction, consistent performance and guaranteed non-toxicity.

More Information

Surgical Cotton

Surgical Cotton also known as absorbent cotton wool or purified cotton is used at large in surgery as a dressing material for burns & wounds as a cotton bedding for maintaining a uniform temperature in inflamed parts and therefore finds applications in Hospitals, Dispensaries, Nursing homes, etc.A good quality absorbent cotton is characterized by its uniform quality and staple fibres having average length more than 1.5 cm.The absorbent cotton when impregnated with capscuium celnrsin and methyl salicylate gives capcuim cotton/wool which can be used as counter irritant and in the treatment of rheumatic producing heat on undamaged skin.

More Information

Palmarosa Oil

Cymbopogon martini belongs to family Poaceae that yields important oil having good export demand. Palmarosa oil is a pale yellow or pale olive liquid with a sweet, floral rosy odor and various backnotes or topnotes according to the quality and age of the oil. Palmarosa oil blends well with all the conventional soap perfume materials and it forms an excellent base with small amounts of geranium oil and oakmoss concrete or absolute.The name geranium palmarosa is a carryover from the days when palmarosa oil was used as an adulterant for Turkish rose oil.

More Information

Food Processing Training Center

Food processing is a large sector that covers activities such as agriculture, horticulture, plantation, animal husbandry and fisheries. It also includes other industries that use agriculture inputs for manufacturing of edible products.TAFE NSW Riverina Institute is currently providing Nationally accredited training modules from the Certificates in Food Processing to both large and small enterprises.

More Information

Friday, September 22, 2006

oyster mushroom spawns

Hi all.

I am Sharad.

While i was searching sources for oyster muchroom spawns, I found your Id's from this link... (cool)

Actually i am very fond of doing mushroom production for my own consumption. Earlier I was in indore and was able to get the oyster mushroom seeds (spawns) from a local source there, but in pune i am a new guy. Can you please tell me the any source from where i can purchase oyster mushroom spawns in Pune or nearby city to be continued my hobby.

Hope atleast one will reply me with information.

Thanks and regards

Hi sharad
please check with
1.Viraj Biotech, Mumbai
Manufacturers of mushroom spawns and dried oyster mushrooms.Address: 78/502, Arjun, Vasant Vihar, Pohkaran Road No. 2, Thane (West), Mumbai, Maharashtra - 400 601, IndiaPhone: +(91)-(22)-25397321
2.Damtas Mushrooms Limited
Sellers of dry and fresh oyster mushrooms.Address: D3, Panacea Apts, Opp. Ct.general Hospital, Near Srpf Quarte, Wanwaadi, Pune - 411 011, IndiaPhone: +(91)-(20)-6814902
best wishes & goodluck !

Digital class

Digital Class allows users to annotate over any image on their PC screen; to collaborate in group settings with electronic whiteboard tools; to record voice and notes in a compressed file and post it to the web or e-mail it. One of the most powerful features of Digital Class is its ability to record notes together with the sound track, both of which may be reviewed at a later time, either via the Internet or a LAN.

More information

Tuesday, September 19, 2006


Coltan is a dull metallic ore found in major quantities in the eastern areas of Congo. When refined, coltan becomes metallic tantalum, a heat-resistant powder that can hold a high electrical charge.Eighty-percent of the world’s known coltan supply is in the Democratic Republic of Congo. Coltan is mined through a fairly primitive process similar to how gold was mined in California during the 1800s.Coltan mining is very well paid in Congo terms. The average Congolese worker makes $10 a month, while a coltan miner can make anywhere from $10 to $50 a week.

More Information

Monday, September 18, 2006


Lime is a high-bulk, comparatively low-cost commodity;however, it may be sold within a wide radius depending on transportation costs and supply and demand.High-calcium quicklime is commercially available in six forms: lump, crushed, pebble, ground, pulverized,and as briquettes or pellets. Slaked lime is produced from mixing quicklime and water and may be purchased as a putty, dry powder or slurry.

More Information

Technology Transfer

Technology transfer is a broad set of processes covering the flows of know-how, experience and equipment for mitigating and adapting to change amongst different stakeholders. Technology transfer activities in supporting the technology transfer effort to developing countries are tailored to provision of directly applicable tools such as guidelines for entrepreneurs, demand surveys, foresight methodologies and benchmarking.

More Information


Moringa oleifera is the best known of 14 species of Moringa tree (family Moringaceae). It is a fast-growing, drought-resistant tree native to sub-Himalayan tracts of northern India, and is now growing worldwide in the tropics and subtropics.Moringa oleifera is a multi-purpose tree with a variety of potential uses. The leaves, pods, seeds, flowers, and roots of the Moringa tree are edible, though the bark of the Moringa root should be scraped off because of its toxicity, and the flesh of the root should be eaten sparingly.

More Information


Guduchi is a perennial plant of weak and fleshy stem found throughout the India. The aerial roots that arises from the stem are tread like. The leaf is heart shaped and smooth. The flowers are yellowish in colour emerges in bunch in rainy season. The fruits of guduchi are pea like which are seen in winter in India. Guduchi acts as a diuretic and found to be effective against Renal obstruction like calculi and other urinary disorders.The extract of root and stem of guduchi is bitter Antiperiodic, alterative, diuretic. The extract is useful as general tonic, aphrodisiac, corrects the liver disorders and causes infective hepatitis and jaundice.

More Information


Metamitron belongs to Triazinones chemical family.Molecular weight of metamitron is 202.2400.Gives off irritating or toxic fumes in a fire.The substance decomposes on heating producing toxic fumes including nitrogen oxides.The substance is toxic to aquatic organisms. This substance does enter the environment under normal use. Great care, however, should be given to avoid any additional release, e.g. through inappropriate disposal.

More Information

Fuel Cell

A fuel cell is an electrochemical energy conversion device. Fuel cells differ from batteries in that they are designed for continuous replenishment of the reactants consumed; they produce electricity from an external supply of fuel and oxygen as opposed to the limited internal energy storage capacity of a battery.
Fuel cells are very useful as power sources in remote locations, such as spacecraft, remote weather stations, large parks, rural locations, and in certain military applications.

More information

Saturday, September 16, 2006


The concept of a chemical substance became firmly established in the late eighteenth century after work by the chemist Joseph Proust on the composition of some pure chemical compounds such as basic copper carbonate.In the past and at present, the chemical industry is still concentrated in three areas of the world- Western Europe, North America and Japan . The European Community remains the largest producer area followed by the US and Japan. Environmental Issues, Pollution Control Rules & Regulations are very important aspects and pose challenge to Entrepreneurs in the filed.

More Information

Thursday, September 14, 2006

Engineering Products

Engineering products includes Aerospace products, Automotive products, Medical products, Construction equipment, Electronic products, Electrical products , Consumer products.... Indian Engineering Industry producing castings, forgings , fasteners ,highly sophisticated micro-processor based process control equipment ,diagnostic medical instruments, bearings, steel pipes and tubes have good prospects overseas

More information

Calcium Carbide

Calcium carbide (CaC2) is manufactured by heating a lime and carbon mixture to 2000 to 2100°C (3632 to 3812°F) in an electric arc furnace. Calcium carbide is a very important basic material in the organic synthesis industry. When mixed with other materials, the combination can produce acetylene, chloroprene rubber, calcium cyanamide, acetate acid, trichloroethylene,and acetaldehyde. Moreover, it can be used as a desulfuring agent in steel manufacturing and is used for metal cutting and welding.

More information

Wednesday, September 13, 2006

Ashoka Tree

Ashoka Tree is one of the sacred trees of India. It is found throughout India. The plant is prized for its beautiful foliage and flowers.Other Names: Ashoka Tree, Anganapriya, Asogam, Asokada, Ashopalava, Asok, Asoka, Asoka Tree, Asupala, Gandapushpa, Kankelli, Kenkalimara, Thawgabo, Vichitrah.Found in the foothills of central and eastern Himalayas, almost all over the northern plains of India as well as on the west coast of Bombay, its flowering season is around April and May.

More Inforamtion


Paracetamol is a painkiller, more technically described as a non-opioid analgesic. As a painkiller, it's similar in strength to aspirin, but does noIndian Pharmaceutical exports are to be tune of Rs 25 billion,of which nearly 50% are bulk drugs.Indian Pharmaceutical market grew 14% to Rs.12,923 core($3,124 million),up by Rs.1,597 crore compared to 1997 turnover of Rs.11,326 crore($2,832 million).t have the anti-inflammatory action of aspirin.

More Information

Saturday, September 09, 2006

Contact lens

In 1887, Adolf Fick was apparently the first to successfully fit contact lenses, which were made from brown glass
With over 31 million people wearing contact lenses in the United States alone, it is obvious that contact lenses are the number one choice for many people with vision correction needs.
In the early days of contact lens manufacturing PMMA lenses were produced with equipment of limited accuracy and polishing was used to give the lens its final surface and geometric quality. One of the important developments in lens manufacture was the introduction of high precision lathes in the early 1990s.

More information

Wednesday, September 06, 2006

Casting and Forging Buyers

The castings and forgings market is mostly a subcontracting industry, supplying a wide range of industries. Customers of the casting and forging companies are main suppliers of modules (e.g. motor blocks, vessels, valves), the Original Equipment Manufacturers (OEM) and their subcontractors.Pune-based Bharat Forge, India’s largest forging company, leads the pack, investing some US$135m its Pune plant to boost annual production capacity to 240,000 tonnes

More information

Tuesday, September 05, 2006

Industrial Water

Water treatment is used to optimize most water-based industrial processes,such as: heating, cooling,processing, cleaning, and rinsing, so that operating costs and risks are reduced.Suppliers of the Russian water treatment market are Finland, Sweden, Denmark, U.K.,Italy, France, Sweden, Israel, Czech Republic, Switzerland, and Turkey.

More Information

CD Manufacturing Project

In computing, sound reproduction and video, an optical disc is flat, circular, usually polycarbonate disc whereon data is stored in thMinidisc industry hardware: Sony, JVC, Kenwood, Aiwa, Sharp, Sanyo, Hitachi, Mitsubishi, Sansui, Toyota, Nissan, Ford, Panasonic, Pioneer, Denon, Clarion, Onkyo, Fujitsu-Ten, Teac, Yamaha, Alphine, Gold-Star, RCA and Telefunken. e form of pits (or bumps) within a flat surface.

More Information


e-Learning refers to learning that is delivered or enabled via electronic technology. It encompasses learning delivered via a range of technologies such as the internet, television, videotape, intelligent tutoring systems, and computer-based training. Many institutions worldwide, but particularly in North America, Australia and New Zealand, the United Kingdom, and several other European countries, such as Norway, Denmark and the Netherlands, have started to invest heavily in online teaching.

More Information

Friday, September 01, 2006

Car Wash Project

A car wash that meets the customer's expectations and is a profitable location for the operator includes good market research, survey and investigation, site specifics and analysis, and equipment selection.
The car wash types are Full-service conveyor car washes, exterior-only conveyor car washes, In-bay automatic car washes, Self-service car washes

More information